Installation

From Aero Manual
Revision as of 08:38, 5 December 2016 by 7kyf0x (Talk | contribs) (Created page with "*Horizontal (0°) *Horizontal (180°) *Horizontal (0° + umgekehrt) *Horizontal (180° + umgekehrt) *Vertikal (0° - linke Seite) *Vertikal (180° - linke Seite) *Vertikal (0...")

Jump to: navigation, search
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎magyar • ‎italiano

Die ordnungsgemäße Montage des Spirits spielt eine wichtige Rolle für den korrekten Betrieb Ihres Modells.

Finden Sie einen passenden Ort, an dem die Vibrationen so niedrig wie möglich sind – dies ist normalerweise die Stelle, die vom Hersteller zur Befestigung des Kreisels angegeben wird.

Es ist SEHR wichtig, die Einheit so zu montieren, dass die Einheit genau rechtwinklig zu jeder rotierenden Achse steht. Gemäß Ihrer Vorliebe und vorhandenem Platz kann sie in acht verschiedenen Positionen montiert werden:

  • Horizontal (0°)
  • Horizontal (180°)
  • Horizontal (0° + umgekehrt)
  • Horizontal (180° + umgekehrt)
  • Vertikal (0° - linke Seite)
  • Vertikal (180° - linke Seite)
  • Vertikal (0° - rechte Seite)
  • Vertikal (180° - rechte Seite)

In case the unit is positioned so that connectors are facing forwards, select 180°, please. If the unit is mounted upside down, select inverted option.

Mounting examples

In the following photo the unit is mounted by double-sided adhesive tape to the frame of model.


Poz1.png


Example 1: Position is Horizontal (180°)



Example 2: Position is Vertical (180° - left side)


In order to better insulate against any vibrations from the model, it is necessary to choose the right double-sided mounting tape. The tape should limit any transmission of vibrations from the model to the Spirit which may produce undesirable flight characteristics. Vibrations may also be caused by damaged bearings, bent shafts and other mechanical issues.

We recommend to use supplied double sided tape.