Difference between revisions of "First flight/en"
From Aero Manual
(Updating to match new version of source page) |
(Importing a new version from external source) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
<div id="up"></div> | <div id="up"></div> | ||
If you are sure that the unit is correctly configured, you are ready for your first flight. | If you are sure that the unit is correctly configured, you are ready for your first flight. | ||
| − | |||
== PRE-FLIGHT CONTROL == | == PRE-FLIGHT CONTROL == | ||
| Line 10: | Line 9: | ||
#Tilt the model, ensure the control elements are compensating in the correct direction on all axes. In other words, movement to a certain direction will result in movement of the control element (it's end) in the same direction. | #Tilt the model, ensure the control elements are compensating in the correct direction on all axes. In other words, movement to a certain direction will result in movement of the control element (it's end) in the same direction. | ||
#Check that input from the transmitter sticks is moving with the control elements in a proper directions. | #Check that input from the transmitter sticks is moving with the control elements in a proper directions. | ||
| − | <br /> | + | <br/> |
{{Quote| | {{Quote| | ||
If you encounter a problem or something appears wrong at this point, do not try to take off! | If you encounter a problem or something appears wrong at this point, do not try to take off! | ||
}} | }} | ||
| − | |||
== TAKEOFF == | == TAKEOFF == | ||
| Line 24: | Line 22: | ||
| − | {{Info|[[File:Info.png|18px]] You can perform the first flight without gyro enabled by setting the Global Gain to 0%. For this mode we recommend to perform a trim flight as described in the General section/Trim flight | + | {{Info|[[File:Info.png|18px]] You can perform the first flight without gyro enabled by setting the Global Gain to 0%. For this mode we recommend to perform a trim flight as described in the General section/Trim flight. |
}} | }} | ||
Latest revision as of 20:18, 12 February 2017
If you are sure that the unit is correctly configured, you are ready for your first flight.
1 PRE-FLIGHT CONTROL
- Turn on the transmitter and connect the battery to the model.
- Wait for the initialization, until the control elements will signalize the event.
- Tilt the model, ensure the control elements are compensating in the correct direction on all axes. In other words, movement to a certain direction will result in movement of the control element (it's end) in the same direction.
- Check that input from the transmitter sticks is moving with the control elements in a proper directions.
If you encounter a problem or something appears wrong at this point, do not try to take off!
2 TAKEOFF
- Set the Global Gain (Gyro Gain) to value of 40% for the first flight. This will set the Head Lock mode at a moderate activity for all 3-axes.
- Spool up the motor to a desired speed.
- Take off as you are used to.
- In any time, you can switch the Global Gain to 0% which will deactivate the Gyro operation if needed.
You can perform the first flight without gyro enabled by setting the Global Gain to 0%. For this mode we recommend to perform a trim flight as described in the General section/Trim flight.
