Problémy a jejich řešení

Popis problému	Řešení
Aileron, elevator or rudder drifts after initialization	Check trims and subtrims. Sticks in neutral position must be 0%, see the Diagnostics tab. Increase Stick deadband in the Advanced tab.
Řízení modelu není precizní	Přidejte v záložce Senzor zisk senzoru a/nebo zvyšte zisk gyra ve vysílači. Přidejte exponenciální výchylky ve vysílači.
Model osciluje přes osu křidélek, výškovky či směrovky	Uberte zisk senzoru pro příslušnou osu v záložce Senzor postupně po pěti, dokud problém nezmizí. Zkontrolujte, zda je chod mechaniky dostatečně hladký.
Model rotation is too slow/fast	Increase/decrease Dual Rate for rudder in your transmitter. Or increase/decrease Feed forward value in the Advanced tab.
Servos jitter randomly without external influences	Check the cable connection between the receiver and the unit.
Aggressive stick movement leads to a bouncing	Decrease Feed forward in the Advanced tab or decrease Sensor gain for the affeced axis in the Sensor tab.
Stick input response is delayed or steering is disconnected	Increase Feed forward in the Advanced tab.
Initialization finished notification was changed	Flight log from the previous flight was saved. View the log in the Diagnostic tab and fix reported problem.
Control elements are jumping in a cycle when initialization is finished	The unit was started with the Rescue mode engaged. Turn off the rescue from your transmitter.